*Papertrey Ink cardstock in Hawaiian Shores and Blueberry Sky
*Cricut Imagine (and Bazzill Textured White cardstock)
*Cricut Imagine “Buccaneer” Art Cartridge
*Cuttlebug Embossing Folder: “Persia”
*Tsukineko Memento Ink in Danube Blue
*Papertrey Ink Label Steel Die
*Papertrey Ink Sentiment Acrylic Stamp
For my second exploration with Tim Holtz’s new Alterations line, I decided to use the Sizzix Bigz die entitled “Caged Bird”. I also wanted to make a home décor piece instead of my usual card. I have to confess that I’m actually not through with this project, but I was so excited with the results thus far that I couldn’t wait to share it with you. I will be framing this in a thick dark wood frame as it is meant to be a small wall hanging.
The “Caged Bird” steel rule die will cut three pieces when run through your Sizzix Big Shot or ProvoCraft Cuttlebug. You will get the birdcage frame, the bird’s body on a branch, and a bird wing. Instead of working with cardstock (and since this was intended to be a home décor piece and needed to be a bit sturdier), I chose to use a piece of thick chipboard as my base and Tim Holtz Grungeboard to cut my pieces from. The chipboard is a very sturdy piece from a Die Cuts With A View (DCWV) assorted chip board stack. The 4″ x 6″ chipboard is covered on both sides with a textured cardstock in a dusty rose color. The Grungeboard was a 4″ x 6″ sheet as well, though it had a “dots” texture to it. I would have preferred a plain piece when I started, but in the end, the texture added some nice highlights to the elements.
With my Grungeboard pieces cut out via my trusty Cuttlebug, I used some Tim Holtz Distress Inks and my applicator to color the pieces. The cage was colored with Black Soot distress ink. The bird body and wing were colored with Mustard Seed; The legs and branch were colored with Walnut Stain. I was pleased with the look of the cage. The Black Soot gave it the look of an ornamental iron piece that had seen some use and wear. The bird’s body, however, just didn’t pop enough for me with just the inking. I decided my caged bird needed to be a focal point. I used some adhesive and canary yellow glitter to coat the body and wing. After they were completely dry, I used some Smooch ink to accent his eye and his beak.
One of the main reasons I chose to use Grungeboard was for the pliability and dimension of the material. All along, my theme was to have the bird “breaking out” of his cage to leap to his magical flight. That’s why I sort of threaded his body through some of the bars of the cage and made sure his wing was exposed from captivity. This type of manipulation would have been difficult without a material that had some give to it and did not permanently bend or crease. The wing and the cage are attached to the backdrop chipboard using Stampin’ Up! Stampin’ Dimensionals–which again emphasizes the dimensionality of the project.
The die for “Caged Bird” punches out five holes on the bottom of the cage as a decorative detail. In my mind, I had already pictured hanging some crystal chandelier drops from the holes. But as I worked on the project and developed the theme of the bird breaking out of his cage, I though some Tim Holtz typewriter key charms might be a better bet. With the sentiment of “FLY” in mind, I chose three charm backings and used the circular alphabet stickers for my word. Originally, I wanted all of the charms to be the creme color. However, I couldn’t find a “Y” in that coloration and had to use a black sticker. At first, I was disappointed with the look. But upon further study, I really like the off-kilter lettering. Not only does it tie into the cage color, but it sort of identifies that “breaking out” theme by achieving your goal no matter what it takes (like the wrong color letter). Once you place the letters in the charm frames, you use an adhesive acrylic bubble to cover the charm. I used some Tim Holtz jump rings to attach the charms to the cage. For the two holes that did not have dangles, I covered them with rhinestones.
The final touch on the project was the hanging chain atop the cage. Again, the chain is from Tim Holtz. I attached it to the cage with another jump ring. To anchor the chain, I chose a fabric and crystal covered brad from K & Co. to complete the look. I pierced a hole through the chipboard and inserted the brad. I think once I mount this piece in a frame, it’s really going to set off the look. I will try to remember to photograph the finished piece and share it with you later.
Yesterday was all about Mr. Tim Holtz for me (and my pocketbook). First, I received my copy of Mr. Holtz’s new book, “A Compendium Of Curiosities”–which I’ll get to in a moment. Secondly, I ordered nearly $200 of his new Alterations line. I am in awe of the versatility of some of the new Sizzix Bigz dies and edge dies he’s come up with. If you haven’t visited Tim Holtz’s blog as of late, I highly recommend you take a look at the set of new videos he posted describing his intentions and examples of the new Alterations line of products. Needless to say, I’m hooked (line and sinker). I’ve always been a fan of Mr. Holtz’s tools and products (a fact my craft stash would attest to in a court of law). I suppose his aesthetic may not appeal to all crafters, but I have to say I love the grunge look of his style and his methods of repurposing objects and trinkets. It’s also one of the few craft lines that is very male and teen friendly (in my opinion). Among the dies I am eagerly awaiting: Caged Bird, Fanciful Flight, Gadget Gears, Tattered Florals, Hanging Sign, Ornamental, Keyholes, Styled Labels, Three Hole Punch, and File Tabs. (The sad part is there are still a few more I want–but they weren’t in stock at the moment. So, I’m sure I’ll be placing another order on down the road.)
But enough about my shopping habits…and on to the book. Can I just say right up front that this book belongs in every crafter’s library. Whether you are a Tim Holtz fan like me or just interested in new methods, techniques, and ideas, this book is for you. The hardcover book (with interior spiral binding) measures approximately 8 3/4″ x 8 3/4″ and has 77 pages. But don’t be fooled by that number. The book is bursting with information and wonderfully rendered color photographs presented with Mr. Holtz’s usual panache and flair.
Beginning with a brief introduction to the man and his studio–as well as a list of products he has developed or helped to develop and their intended uses–the book wastes no time getting to its essential core. It’s broken down into three major sections: Ideas, Techniques, and a Gallery.
In the Ideas section, Holtz explores different elements and embellishments and how they can affect your projects–whether they be layouts, cards, mini-books, etc. Among the topics he discusses and shows examples of:
My favorite section has to be the Technique section. In it, Mr. Holtz teaches us to use some of his famous techniques, tips and tricks. What’s clever is that most of them are done is six simple steps with accompanying full-color photographs. Among the techniques highlighted are:
The final section is a wonderful gallery of projects done by Mr. Holtz that incorporate many of the techniques, tools, and examples used throughout the book. What really surprised me was that even someone like myself who has used a lot of Holtz products can still find new information on how to use products that you hadn’t thought of or didn’t realize you could do. I was really excited by the fragments projects (and will be working on some of those in the near future.
“A Compendium Of Curiosities” retails for $24.99 and, in my opinion, is worth every single penny. I highly recommend this book to anyone with even a faint interest in papercrafting.