Blue Bird







Advertisements

Ahoy, Matey!

I finally got around to playing with some of my new goodies from Papertrey Ink’s October 2010 releases. The box had just been sitting there waiting for me to pillage and plunder. Can I just say I am in love with the new color ways–Blueberry Sky and Pinefeather. I ordered the cardstock, satin ribbon, polka dot ribbon, and wool felt in both colors. They are truly yummy! In addition to my stamp picks, I had to order the new die set called “Limitless Layers: 1 3/4″ Circle Collection”. This five piece die set has limitless possibilities and is definitely a must-have. Today’s card project uses the die set and some of the new Blueberry Sky collection.

The basic premise of the “Limitless Layers” set is that you have a 1 3/4″ circle die shape that can be backed by four different decorative circle shaped dies to create tags, badges, buttons of various materials to embellish your craft projects. I chose to use the scalloped punch out die and a piece of American Crafts glitter cardstock in Ocean to create the sentiment badge for my project.

For those that are curious, the Papertrey Ink die line will work with nearly all die-cutting systems (e.g., Sizzix, Cuttlebug, Spellbinders, etc.). While I have a Sizzix Big Shot, more times than not I will grab my Cuttlebug to use the dies and they cut wonderfully. The correct “sandwich” recipe for using these dies is: A Plate + C Plate + die + material + B Plate.

For this card, I used the new Papertrey Ink Blueberry Sky cardstock as my base (5 1/2″ x 8 1/2″). The base mat is a piece of Stampin’ Up! textured cardstock in Brilliant Blue (5″ x 3 1/4″). The decorative mat is Die Cuts With A View (DCWV) cardstock from the “All About Boys” stack (4 3/4″ x 2 1/2″). The scallop cut is American Craft glitter cardstock (2 1/8″ diameter). I wasn’t sure if I was going to use a colored circle (Blueberry Sky) or a white circle (Stampin’ Up! Whisper White) to stamp on–so I cut both just to have the option. (NOTE: I used my Zutter 1/2″ Round-It-All to cut the corners off the cardstock base and mats.)

While flipping through the DCWV “All About Boys” stack, I found a page that had a glazed image of a pirate ship on it and it served as the inspiration for the project.

To begin layering my card, I wrapped a piece of the coordinating Papertrey Ink Blueberry Sky satin ribbon around the Brilliant Blue mat and then adhered that layer to my card base. I chose to place the mat on the folded (scored) edge of the card to create a bit of visual interest with the ultimate color layering.

Next, I inked the edges of the pirate ship mat with Tsukineko Memento ink in Danube Blue and adhered it to the ribboned mat layer.

For my sentiment badge, I decided to use the white background and a Stampin’ Up! set called “Pirate Time”. I stamped the skull image using the Memento Danube Blue ink and the captain’s hat using StazOn in Jet Black. I used a Sakura Glaze pen in Black to handwrite the “Ahoy!” sentiment and inked the circle edges with more Danube Blue and a sponge dauber. I used Stampin’ Dimensionals to adhere the white layer to my glittered scallop and then attached the badge to the cardfront.

The final touch was another stamped image on the inside of the card. Keeping with the pirate theme, I used a skull map stamp from a Stampin’ Up! set entitled “Beware Pirates” and StazOn Jet Black to finish my card.

Here are a few more close-up images of the finished project:





Stitched Harvest

Today’s card project is decidedly Fall in theme and feel. I originally was setting out to make a Halloween-specific card, but the more I worked with colors and paper selection–it became more vintage and retro. I originally was going to use the paper piecing (the patchwork pumpkin) to create a goofy jack-o-lantern that I was going to name Franken-Pumpkin (ergo the “stitch” marks). In the end, it is a much more muted and elegant affair–and I’m okay with that.

This is also one of the rare times I make a 6″ x 6″ card. The base cardstock (6″ x 12″) is Bazzill textured cardstock in Raven, which was scored at 6″. The scalloped portion of the sentiment is Bazzill as well. The sentiment oval is Stampin’ Up! cardstock in Peach Parfait and the base pumpkin shape is Papertrey Ink Simply Chartreuse cardstock. All of the other paper used in the construction (patchwork pieces, mat, and inside sentiment block) are from Memory Box’ “Blackbird” collection.

You really need to sketch a general pumpkin shape on a piece of heavy white cardstock to create a pattern. Here, you can decide how big you want your pumpkin to be and where you want to make the “cuts” for your patchwork pieces. After you trace your pattern shape on your base colored cardstock, you can then actually cut the pieces of your pattern out and use them as templates for your decorative paper pieces. (I hope that made sense.)

Once I picked the decorative papers I wanted to use, I cut them down to my template sizes and adhered them to my base cardstock. I highly recommend that you glue your patchwork pieces together on the base cardstock before you start worrying about punching and stitching. Once my pumpkin was together, I used a paper piercer to punch out my stitching holes. You need to think this out a bit and pay particular attention to where your stitches will intersect with one another. After my punching was complete, I used a Bazzill needle and stitching floss in a forest green color. The beginning and end stitches of my floss are simply taped to the back of my pumpkin. I used a simple stitch pattern and the results are quite effective I think. I used Stampin’ Dimensionals to adhere the finished pumpkin to my cardfront–giving it a bit more depth and interest.

Then sentiment medallion was created using Stampin’ Up! punches (oval and scalloped oval) and the actual sentiment is from a Papertrey Ink stamp set. I used Stampin’ Dimensionals again to elevate the medallion. For the inside of the card, I used an entire 6″ x 6″ block of Memory Box paper. I embellished it with the spiderweb, jack-o’-lantern, and bat using a Sakura Glaze pen in black. In this instance, I think the inside is just as fun to look at as the front.





Well, that’s it for today! I hope the air is nippy where you are (and that you have a blanket to cozy up with at night while you watch the leaves fall from the trees). I hear a Giveaway might just be on its way…hmm.

All Girl

(To no one’s surprise) I sometimes think there is a fourteen year-old girl trapped in my 44 year-old body. (Wait, that’s sounds really bad doesn’t it?) So last night, I thought I’d try to channel that spirit and do a “girly” card. Now, I have no problem being in touch with my feminine side. But, doing a tween card is something I don’t do on a regular basis. I thought it would be an interesting challenge. I’m not really sure if was a challenge conquered or not. It may be a bit too much…but nonetheless, here’s what I came up with using the new Cricut Lite cartridge ‘Slumber Party’.







* MATERIALS & TOOLS USED: American Crafts decorative cardstock from the “Teen” Collection; Stampin’ Up! cardstock in Cherry Cobbler, Pink Passion, Basic Black; Die Cuts With A View cardstock from the “Shimmer” Collection; Cricut Expression, Cricut Gypsy; Cricut Lit Cartridge “Slumber Party”; Sakura Glaze pen in Black; Imaginisce I-Rock heat tool; Imaginisce Glam Rocks in “Mirror”; Zutter Round-It-All 1/2″ corner tool; Zig Two-Way glue pen; Carl RT-200 trimmer; Scor-Pal;

Gentlemanly








Materials & Tools Used:

  • Stampin’ Up! cardstock in Early Espresso
  • SEI decorative pearlized paper from the ‘Windsor’ Collection
  • Graphic 45 cardstock from ‘A Proper Gentleman’ Collection
  • Pink Paislee decorative paper from the ‘Queen Bee’ Collection
  • Stampin’ Up! 1/8″ taffeta ribbon in Early Espresso
  • Kaiser Craft adhesive half pearls in Oyster Black
  • Sakura Glaze Pen in Black
  • Papertrey Ink Vintage Touch ink in Chai
  • Tim Holtz Nostalgia Tissue Tape
  • 3M ATG 714 adhesive
  • Carl RT-200 paper trimmer
  • Stampin’ Up! ticket corner punch
  • Scor-Pal
  • Tim Holtz non-stick micro-serrated scissors