The Perfect Word For You…

Oh, Children! The tales I could tell (but my therapist assures me doing so would only scare the average reader/viewer and expose myself to some embarrassing litigation). The short and sweet version is that I’ve been MIA for much longer than my liking. Ideally, I would love to maintain this blog with new content every three to four days minimum. I actually wish I could commit to daily content, but I know that would only lead to guilt the very first time I missed a deadline.

So for a bit, I lost my way. Not so much that I didn’t craft. Oh, no…I continued to make projects and explore ideas while I was gone. I just never had the heart or the “oomph” to get them photographed and uploaded. One could say that was extreme laziness on my part (and I can’t defend myself), but I think I attribute it to a weather phenomenon where Fall refused to arrive (until only recently). It made me moody and restless. I was so over Summer (like in June). Nonetheless, I’m going to try and be a more hospitable and accommodating host henceforth.

Today’s project is one that I sort of “forced” myself into. If you’ve followed this blog for sometime–or even flip through some of the most recent projects I’ve posted–it becomes fairly evident that I love color. In general, I am not a pastel person. I like bold, deep, intense colors and tones. I love intricate and dense patterns and designs. (I’m fairly certain this has do with my being a Leo–as we seem to have some foolhardy notion that we were royalty in another life–and in my case, presently.)

So, now and again, I like to challenge myself to something in a softer palette. I was of the mind frame that I wanted to explore some subtle colors like ecru, eggshell, and linen to see what I could come up with. So I grabbed my Copic Sketch markers and rummaged around in my Papertrey Ink goodies and came up with this little number.

Using an image from Papertrey Ink’s “Year of Flowers” series–in the case the gladiolus (the flower for August)–I stamped the image on some white cardstock and cut around the image. I tried to limit my color selections to muted colors, with the obvious exception of the leaves and stems. I think what makes this combination work particularly well is the background mat paper. I used several dyes and inks to create a water-stained look using sponges and water. It took some experimenting to prevent the paper from becoming to saturated with liquid and creating dimpling and curling. Patience helps–and allowing drying time between color applications.




Glübers

Today’s card project was inspired by trying out a new product introduced in January by Cosmo Cricket: Glübers. Not only do I love the name, but the actual product is very nifty. The easiest way to tell you what Glübers are (if you haven’t played with them yet) is to picture a 2″ giant glue dot. Actually, Glübers come in a size range that includes 2″, 2.5″ and 3″ circular bases. So what do you do with a Glüber? It’s the perfect adhesive base for experimenting with ribbon, fabric, netting, seam binding tape, etc. to create your own floral embellishments. It gives you the ability to control the shapes, colors, material and design to create just what you need for a particular crafting project.

Now, I don’t profess to be a Glübers expert–in fact, the flower on this project is my first project. But, I can already tell you that they are addictive and I already have several ideas I’m looking forward to experimenting with. For this project, I worked with a solid length of ribbon, though it is quite adaptable. You can use scraps, fragments, twine, cording–nearly anything you can imagine to create flowers, rosettes, and other personal embellishments. I started from the outside edge and worked my way to the center. The way you fold or twist your ribbon is entirely in your hands.

My card base is Stampin’ Up! cardstock in Soft Suede. The card mat is Basic Grey paper from the “Capella” Collection. The sentiment stamp is from Papertrey. The ribbon is 5/8″ Swiss Dot Satin in Dark Chocolate from Papertrey Ink as well. For the middle of my rosette styled flower, I used a flatback Sparkler button from Webster’s Pages.






LaBlanche Rose Stamp

Today’s card project was inspired by a single stamp. I recently came across a unique stamp line that originates from Germany called LaBlanche. The stamps are intricate pieces of artwork that are captured in a high-quality white silicone and pre-mounted on a foam block. The silicone allows for high-definition detail to be imparted into your stamping–as well as being perfect for heat applications as they are silicone. I saw the image of this rose and was immediately hooked. The LaBlanche line is big in Europe and has developed a large cult following here in the U.S.

Inspired by the rose image, the rest of the project was built around showcasing the rose. The other stamp and paper elements showcase it nicely (I think). Copic users will love the details in these images for coloring (and the built in shading helps beginners get a better feel for layering your colors). The cardstock and ribbon are from Papertrey Ink. The decorative paper is from DCWV’s “Mariposa” Stack.








Caged Bird

For my second exploration with Tim Holtz’s new Alterations line, I decided to use the Sizzix Bigz die entitled “Caged Bird”. I also wanted to make a home décor piece instead of my usual card. I have to confess that I’m actually not through with this project, but I was so excited with the results thus far that I couldn’t wait to share it with you. I will be framing this in a thick dark wood frame as it is meant to be a small wall hanging.

The “Caged Bird” steel rule die will cut three pieces when run through your Sizzix Big Shot or ProvoCraft Cuttlebug. You will get the birdcage frame, the bird’s body on a branch, and a bird wing. Instead of working with cardstock (and since this was intended to be a home décor piece and needed to be a bit sturdier), I chose to use a piece of thick chipboard as my base and Tim Holtz Grungeboard to cut my pieces from. The chipboard is a very sturdy piece from a Die Cuts With A View (DCWV) assorted chip board stack. The 4″ x 6″ chipboard is covered on both sides with a textured cardstock in a dusty rose color. The Grungeboard was a 4″ x 6″ sheet as well, though it had a “dots” texture to it. I would have preferred a plain piece when I started, but in the end, the texture added some nice highlights to the elements.

With my Grungeboard pieces cut out via my trusty Cuttlebug, I used some Tim Holtz Distress Inks and my applicator to color the pieces. The cage was colored with Black Soot distress ink. The bird body and wing were colored with Mustard Seed; The legs and branch were colored with Walnut Stain. I was pleased with the look of the cage. The Black Soot gave it the look of an ornamental iron piece that had seen some use and wear. The bird’s body, however, just didn’t pop enough for me with just the inking. I decided my caged bird needed to be a focal point. I used some adhesive and canary yellow glitter to coat the body and wing. After they were completely dry, I used some Smooch ink to accent his eye and his beak.

One of the main reasons I chose to use Grungeboard was for the pliability and dimension of the material. All along, my theme was to have the bird “breaking out” of his cage to leap to his magical flight. That’s why I sort of threaded his body through some of the bars of the cage and made sure his wing was exposed from captivity. This type of manipulation would have been difficult without a material that had some give to it and did not permanently bend or crease. The wing and the cage are attached to the backdrop chipboard using Stampin’ Up! Stampin’ Dimensionals–which again emphasizes the dimensionality of the project.

The die for “Caged Bird” punches out five holes on the bottom of the cage as a decorative detail. In my mind, I had already pictured hanging some crystal chandelier drops from the holes. But as I worked on the project and developed the theme of the bird breaking out of his cage, I though some Tim Holtz typewriter key charms might be a better bet. With the sentiment of “FLY” in mind, I chose three charm backings and used the circular alphabet stickers for my word. Originally, I wanted all of the charms to be the creme color. However, I couldn’t find a “Y” in that coloration and had to use a black sticker. At first, I was disappointed with the look. But upon further study, I really like the off-kilter lettering. Not only does it tie into the cage color, but it sort of identifies that “breaking out” theme by achieving your goal no matter what it takes (like the wrong color letter). Once you place the letters in the charm frames, you use an adhesive acrylic bubble to cover the charm. I used some Tim Holtz jump rings to attach the charms to the cage. For the two holes that did not have dangles, I covered them with rhinestones.


The final touch on the project was the hanging chain atop the cage. Again, the chain is from Tim Holtz. I attached it to the cage with another jump ring. To anchor the chain, I chose a fabric and crystal covered brad from K & Co. to complete the look. I pierced a hole through the chipboard and inserted the brad. I think once I mount this piece in a frame, it’s really going to set off the look. I will try to remember to photograph the finished piece and share it with you later.